Physics equations/Rewrite

00-Mathematics for this course

<section begin=00-Mathematics_for_this_course/>

   Measured in radians, $\theta =s/r$ defines angle (in radians), where s is arclength and r is radius. The circumference of a circle is $C_{\odot }=2\pi r$ and the circle's area is $A_{\odot }=\pi r^2$ is its area. The surface area of a sphere is $A_{◯}=4\pi r^2$ and sphere's volume is $V_{◯}=\frac{4}{3}\pi r^3$

Template:SpacesA vector can be expressed as, $\overrightarrow{A}=A_x\hat{i}+A_y\hat{j}$, where $A_x=A\cos \theta$, and $A_y=A\sin \theta$ are the x and y components. Alternative notation for the unit vectors $(\hat{i},\hat{j})$ include $(\hat{x},\hat{y})$ and $(\widehat{e_1},\widehat{e_2})$. An important vector is the displacement from the origin, with components are typically written without subscripts: $\overrightarrow{r}=x\hat{x}+y\hat{y}$. The magnitude (or absolute value or norm) of a vector is is $A\equiv |\overrightarrow{A}|=\sqrt{A_x^2+A_y^2}$, where the angle (or phase), $\theta$, obeys $\tan \theta =y/x$, or (almost) equivalently, $\theta =\arctan (y/x)$. As with any function/inverse function pair, the tangent and arctangent are related by $\tan ({\tan }^{-1}𝒳)=𝒳$ where $𝒳=y/x$. The arctangent is not a true function because it is multivalued, with ${\tan }^{-1}(\tan \theta )=\theta or\theta +\pi$.

Template:SpacesThe geometric interpretations of $\overrightarrow{A}+\overrightarrow{B}=\overrightarrow{C}$ and $\overrightarrow{B}=\overrightarrow{C}-\overrightarrow{A}$ are shown in the figure. Vector addition and subtraction can also be defined through the components: $\overrightarrow{A}+\overrightarrow{B}=\overrightarrow{C}\iff$ $A_x+B_x=C_x$ AND $A_y+B_y=C_y$ <section end=00-Mathematics_for_this_course/>

01-Introduction

<section begin=01-Introduction/>

Text Symbol Factor Exp giga G Template:Gaps E9 mega M Template:Gaps E6 kilo k Template:Gaps E3 (none) (none) 1 E0 centi c 0.01 E−2 milli m 0.001 E−3 micro μ Template:Gaps E−6 nano n Template:Gaps E−9 pico p Template:Gaps E−12

• 1 kilometer = .621 miles and 1 MPH = 1 mi/hr ≈ .447 m/s
• Typically air density is 1.2kg/m³, with pressure 10⁵Pa. The density of water is 1000kg/m³.
• Earth's mean radius ≈ 6371km, mass ≈ Template:Val, and gravitational acceleration = Template:Nowrap beging ≈ 9.8m/s²Template:Nowrap end
• Universal gravitational constant = G ≈ Template:Val
• Speed of sound ≈ 340m/s and Template:Nowrap beginthe speed of light = c ≈ 3×10⁸m/sTemplate:Nowrap end
• One light-year ≈ 9.5×10¹⁵m ≈ 63240AU (Astronomical unit)
• The electron has charge, e ≈ 1.6 × 10⁻¹⁹C and mass ≈ 9.11 × 10^-31kg. 1eV = Template:Nowrap begin1.602 × 10^-19JTemplate:Nowrap end is a unit of energy, defined as the work associated with moving one electron through a potential difference of one volt.
• 1 amu = 1 u ≈ 1.66 × 10^-27 kg is the approximate mass of a proton or neutron.
• Boltzmann's constant = k_B≈ Template:Nowrap, and the gas constant is R = Template:Nowrap≈Template:Nowrap, where N_A≈ Template:Nowrap is the Avogadro number.
• $k_{\mathrm{e}}=\frac{1}{4\pi {\epsilon }_0}$≈ 8.987× 10⁹ N·m²·C⁻² is a fundamental constant of electricity; also ${\epsilon }_0=\frac{1}{4\pi k_{\mathrm{e}}}$ ≈ 8.854 × 10⁻¹² F·m⁻¹ is the vacuum permittivity or the electric constant.
• ${\mu }_0$ = 4π × 10⁻⁷ NA ≈ 1.257 × 10⁻⁶ N A (magnetic permeability) is the fundamental constant of Template:Nowrap beginmagnetism: $\sqrt{{\epsilon }_0{\mu }_0}=1/c$.Template:Nowrap end
• $\hslash$ = h/(2π) ≈ 1.054×10⁻³⁴ J·s the reduced Planck constant, and $a_0=\frac{{\hslash }^2}{k_e{m}_e{e}^2}$ Template:Nowrap begin≈ .526 × 10⁻¹⁰ m is the Bohr radius.Template:Nowrap end

<section end=01-Introduction/>

03-Two-Dimensional Kinematics

<section begin=03-Two-Dimensional_Kinematics/>

$x=x_0+v_{0x}\mathrm{\Delta }t+\frac{1}{2}{a}_x\mathrm{\Delta }{t}^2$	Template:Spaces$v_x=v_{0x}+a_x\mathrm{\Delta }t$	Template:Spaces$v_x^2=v_{x0}^2+2a_x\mathrm{\Delta }x$
$y=y_0+v_{0y}\mathrm{\Delta }t+\frac{1}{2}{a}_y\mathrm{\Delta }{t}^2$	Template:Spaces$v_y=v_{0y}+a_y\mathrm{\Delta }t$	Template:Spaces$v_y^2=v_{x0}^2+2a_y\mathrm{\Delta }y$

$v^2=v_0^2+2a_x\mathrm{\Delta }x+2a_y\mathrm{\Delta }y$   ...in advanced notation this becomes $\mathrm{\Delta }(v^2)=2\overrightarrow{a}\cdot \mathrm{\Delta }\overrightarrow{\ell }$.

In free fall we often set, a_x=0 and a_y= -g. If angle is measured with respect to the x axis:

$v_x=v\cos \theta$ Template:Spaces$v_y=v\sin \theta$ Template:Spaces$v_{x0}=v_0\cos {\theta }_0$ Template:Spaces$v_{y0}=v_0\sin {\theta }_0$ Template:Cot

The figure shows a Man moving relative to Train with velocity, ${\overrightarrow{v}}_{M|T}$, where the velocity of the train relative to Earth is, ${\overrightarrow{v}}_{T|E}$ is the velocity of the Train relative to Earth. The velocity of the Man relative to Earth is,

Template:Spaces$\underset{50km/hr}{\underbrace{{\overrightarrow{v}}_{M|E}}}=\underset{10km/hr}{\underbrace{{\overrightarrow{v}}_{M|T}}}+\underset{40km/hr}{\underbrace{{\overrightarrow{v}}_{T|E}}}$ <section end=03-Two-Dimensional_Kinematics/>

04-Dynamics: Force and Newton's Laws

<section begin=04-Dynamics:_Force_and_Newton's_Laws/> Newton's laws of motion, can be expressed with two equations, $m\overrightarrow{a}=\sum {\overrightarrow{F}}_j$ and ${\overrightarrow{F}}_{ij}=-{\overrightarrow{F}}_{ji}$. The second represents the fact that the force that the Template:Nowrap object exerts one object exerts on the Template:Nowrap object is equal and opposite the force that the Template:Nowrap exerts on the Template:Nowrap object.

05-Friction, Drag, and Elasticity

<section begin=05-Friction,_Drag,_and_Elasticity/>

• $f_k={\mu }_{k}N$ is an approximation for the force friction when an object is sliding on a surface, where μ_k ("mew-sub-k") is the kinetic coefficient of friction, and N is the normal force.
• $f_s\le {\mu }_{s}N$ approximates the maximum possible friction (called static friction) that can occur before the object begins to slide. Usually μ_s > μ_k.

Also, air drag often depends on speed, an effect this model fails to capture. <section end=05-Friction,_Drag,_and_Elasticity/> Template:Cob

06-Uniform Circular Motion and Gravitation

<section begin=06-Uniform_Circular_Motion_and_Gravitation/>

• $2\pi rad=360deg=1rev$ relates the radian, degree, and revolution.

• $f=\frac{\mathrm{\#}\text{revs}}{\mathrm{\#}\text{secs}}$ is the number of revolutions per second, called frequency.

• $T=\frac{\mathrm{\#}\text{secs}}{\mathrm{\#}\text{revs}}$ is the number of seconds per revolution, called period. Obviously $fT=1$.

• $\omega =\frac{\mathrm{\Delta }\theta }{\mathrm{\Delta }t}$ is called angular frequency (ω is called omega, and θ is measured in radians). Obviously $\omega T=2\pi$

• $a=\frac{v^2}{r}=\omega v={\omega }^{2}r$ is the acceleration of uniform circular motion, where v is speed, and r is radius.

• $F=G\frac{mM}{r^2}=m{g}^{*}$ is the force of gravity between two objects, where Template:Nowrap beginG ≈ 6.674 × 10^-11 m³·kg⁻¹·s⁻²Template:Nowrap end.

<section end=06-Uniform_Circular_Motion_and_Gravitation/>

07-Work and Energy

<section begin=07-Work_and_Energy/>

• $KE=\frac{1}{2}m{v}^2$ is kinetic energy, where m is mass and v is speed..
• $U_g=mgy$ is gravitational potential energy,where y is height, and $g=9.80\frac{m}{s^2}$ is the gravitational acceleration at Earth's surface.
• $U_s=\frac{1}{2}{k}_s{x}^2$ is the potential energy stored in a spring with spring constant $k_s$.
• $\sum K{E}_f+\sum P{E}_f=\sum K{E}_i+\sum P{E}_i-Q$ relates the final energy to the initial energy. If energy is lost to heat or other nonconservative force, then Q>0.
• $W=F\ell \cos \theta =\overrightarrow{F}\cdot \overrightarrow{\ell }$ (measured in Joules) is the work done by a force $F$ as it moves an object a distance $\ell$. The angle between the force and the displacement is θ.
• $\sum \overrightarrow{F}\cdot \mathrm{\Delta }\ell$ describes the work if the force is not uniform. The steps, $\mathrm{\Delta }\overrightarrow{\ell }$, taken by the particle are assumed small enough that the force is approximately uniform over the small step. If force and displacement are parallel, then the work becomes the area under a curve of F(x) versus x.
• $P=\frac{\overrightarrow{F}\cdot \overrightarrow{\mathrm{\Delta }}\ell }{\mathrm{\Delta }t}=\overrightarrow{F}\cdot \overrightarrow{v}$ is the power (measured in Watts) is the rate at which work is done. (v is velocity.)

<section end=07-Work_and_Energy/> Template:Cot

08-Linear Momentum and Collisions

<section begin=08-Linear_Momentum_and_Collisions/>

• $\overrightarrow{p}=m\overrightarrow{v}$ is momentum, where m is mass and $\overrightarrow{v}$ is velocity. The net momemtum is conserved if all forces between a system of particles are internal (i.e., come equal and opposite pairs):
• $\sum {\overrightarrow{p}}_f=\sum {\overrightarrow{p}}_i$.
• $\overline{F}\mathrm{\Delta }t=\mathrm{\Delta }p$ is the impulse, or change in momentum associated with a brief force acting over a time interval $\mathrm{\Delta }t$. (Strictly speaking, $\overline{F}$ is a time-averaged force defined by integrating over the time interval.)

<section end=08-Linear_Momentum_and_Collisions/>

09-Statics and Torque

Template:Cot <section begin=09-Statics_and_Torque/>

• $\tau =rF\sin \theta ,$ is the torque caused by a force, F, exerted at a distance ,r, from the axis. The angle between r and F is θ.

The Template:Lw for torque is the Template:Lw (N·m). It would be inadvisable to call this a Joule, even though a Joule is also a (N·m). The symbol for torque is typically τ, the Greek letter tau. When it is called moment, it is commonly denoted M. The lever arm is defined as either r, or r_⊥. Labeling r as the lever arm allows moment arm to be reserved for r_⊥. <section end=09-Statics_and_Torque/> Template:Cob

10-Rotational Motion and Angular Momentum

Template:Cot <section begin=10-Rotational_Motion_and_Angular Momentum/>

Linear motion	Angular motion
$x-x_0=v_{0}t+\frac{1}{2}a{t}^2$	$\theta -{\theta }_0={\omega }_{0}t+\frac{1}{2}\alpha t^2$
$v=v_0+at$	$\omega ={\omega }_0+\alpha t$
$x-x_0=\frac{1}{2}(v_0+v)t$	$\theta -{\theta }_0=\frac{1}{2}({\omega }_0+\omega )t$
$v^2=v_0^2+2a(x-x_0)$	${\omega }^2={\omega }_0^2+2\alpha (\theta -{\theta }_0)$

{{#lst:Physics equations/Equations/Rotational and linear motion analogy}} <section end=10-Rotational_Motion_and_Angular Momentum/> Template:Cob

11-Fluid statics

Template:Cot <section begin=11-Fluid_statics/>

Pressure is the weight per unit area of the fluid above a point.

Pressure versus Depth: A fluid's pressure is F/A where F is force and A is a (flat) area. The pressure at depth, $h$ below the surface is the weight (per area) of the fluid above that point. As shown in the figure, this implies:

$P=P_0+\rho gh$

where $P_0$ is the pressure at the top surface, $h$ is the depth, and $\rho$ is the mass density of the fluid. In many cases, only the difference between two pressures appears in the final answer to a question, and in such cases it is permissible to set the pressure at the top surface of the fluid equal to zero. In many applications, it is possible to artificially set $P_0$ equal to zero, for example at atmospheric pressure. The resulting pressure is called the gauge pressure, for $P_{gauge}=\rho gh$ below the surface of a body of water.

Buoyancy and Archimedes' principle Pascal's principle does not hold if two fluids are separated by a seal that prohibits fluid flow (as in the case of the piston of an internal combustion engine). Suppose the upper and lower fluids shown in the figure are not sealed, so that a fluid of mass density ${\rho }_{flu}$ comes to equilibrium above and below an object. Let the object have a mass density of ${\rho }_{obj}$ and a volume of $A\mathrm{\Delta }h$, as shown in the figure. The net (bottom minus top) force on the object due to the fluid is called the buoyant force:

$\mathrm{b}\mathrm{u}\mathrm{o}\mathrm{y}\mathrm{a}\mathrm{n}\mathrm{t}\mathrm{f}\mathrm{o}\mathrm{r}\mathrm{c}\mathrm{e}\mathrm{=}\mathrm{(}\mathrm{A}\mathrm{\Delta }\mathrm{h}\mathrm{)}\mathrm{(}{\mathrm{\rho }}_{\mathrm{f}\mathrm{l}\mathrm{u}}\mathrm{)}\mathrm{g}$,

and is directed upward. The volume in this formula, AΔh, is called the volume of the displaced fluid, since placing the volume into a fluid at that location requires the removal of that amount of fluid. Archimedes principle states:

A body wholly or partially submerged in a fluid is buoyed up by a force equal to the weight of the displaced fluid.

<section end=11-Fluid_statics/> Template:Cob

12-Fluid dynamics

Template:Cot <section begin=12-Fluid_dynamics/>

A fluid element speeds up if the area is constricted.

• $\frac{\mathrm{\Delta }V}{\mathrm{\Delta }t}=\dot{V}=Av=Q$ the volume flow for incompressible fluid flow if viscosity and turbulence are both neglected. The average velocity is $v$ and $A$ is the cross sectional area of the pipe. As shown in the figure, $v_1{A}_1=v_2{A}_2$ because $Av$ is constant along the developed flow. To see this, note that the volume of pipe is $\mathrm{\Delta }V=A\mathrm{\Delta }x$ along a distance $\mathrm{\Delta }x$. And, $v=\mathrm{\Delta }x/\mathrm{\Delta }t$ is the volume of fluid that passes a given point in the pipe during a time $\mathrm{\Delta }t$.
• $P_1+\rho g{y}_1+\frac{1}{2}\rho v_1^2=P_2+\rho g{y}_2+\frac{1}{2}\rho v_2^2$ is Bernoulli's equation, where $P$ is pressure, $\rho$ is density, and $y$ is height. This holds for inviscid flow.

<section end=12-Fluid_dynamics/> Template:Cob

13-Temperature, Kinetic Theory, and Gas Laws

Template:Cot <section begin=13-Temperature,_Kinetic Theory,_and_Gas_Laws/>

• $T_C=T_K-273.15$ converts from Celsius to Kelvins, and $T_F=\frac{9}{5}{T}_C+32$ converts from Celsius to Fahrenheit.
• $PV=nRT=N{k}_{B}T$ is the ideal gas law, where P is pressure, V is volume, n is the number of moles and N is the number of atoms or molecules. Temperature must be measured on an absolute scale (e.g. Kelvins).
• N_Ak_B=R where N_A= Template:Nowrap is the Avogadro number. Boltzmann's constant can also be written in eV and Kelvins: k_B ≈Template:Nowrap.
• $\frac{3}{2}{k}_{B}T=\frac{1}{2}m{v}_{rms}^2$ is the average translational kinetic energy per "atom" of a 3-dimensional ideal gas.
• $v_{rms}=\sqrt{\frac{3k_{B}T}{m}}=\sqrt{\overline{v^2}}$ is the root-mean-square speed of atoms in an ideal gas.
• $E=\frac{\varpi }{2}N{k}_{B}T$ is the total energy of an ideal gas, where $\varpi =3$

<section end=13-Temperature,_Kinetic Theory,_and_Gas_Laws/> Template:Cob

14-Heat and Heat Transfer

Template:Cot <section begin=14-Heat_and_Heat_Transfer/> Here it is convenient to define heat as energy that passes between two objects of different temperature $Q$ The SI unit is the Joule. The rate of heat trasfer, $\mathrm{\Delta }Q/\mathrm{\Delta }t$ or $\dot{Q}$ is "power": Template:Nowrap begin1 Watt = 1 W = 1J/sTemplate:Nowrap end

• $Q=m{c}_S\mathrm{\Delta }T$ is the heat required to change the temperature of a substance of mass, m. The change in temperature is ΔT. The specific heat, c_S, depends on the substance (and to some extent, its temperature and other factors such as pressure). Heat is the transfer of energy, usually from a hotter object to a colder one. The units of specfic heat are energy/mass/degree, or Template:Nowrap beginJ/(kg-degree)Template:Nowrap end.
• $Q=mL$ is the heat required to change the phase of a a mass, m, of a substance (with no change in temperature). The latent heat, L, depends not only on the substance, but on the nature of the phase change for any given substance. L_F is called the latent heat of fusion, and refers to the melting or freezing of the substance. L_V is called the latent heat of vaporization, and refers to evaporation or condensation of a substance.
• $\dot{Q}=\frac{k_{c}A}{d}\mathrm{\Delta }T$ is rate of heat transfer for a material of area, A. The difference in temperature between two sides separated by a distance, d, is $\mathrm{\Delta }T$. The thermal conductivity, k_c, is a property of the substance used to insulate, or subdue, the flow of heat.
• $\dot{Q}=\sigma AϵT^4$ is the power radiated by a surface of area, A, at a temperature, T, measured on an absolute scale such as Kelvins. The emissivity, $0\le ϵ\le 1$, is 1 for a black body, and 0 for a perfectly reflecting surface. The Stefan-Boltzmann constant is $\sigma \approx 5.67\times 10^{-8}\mathrm{J}{\mathrm{s}}^{\mathrm{-}\mathrm{1}}{\mathrm{m}}^{\mathrm{-}\mathrm{2}}{\mathrm{K}}^{\mathrm{-}\mathrm{4}}$.

<section end=14-Heat_and_Heat_Transfer/> Template:Cob

15-Thermodynamics

<section begin=15-Thermodynamics/>

• Pressure (P), Energy (E), Volume (V), and Temperature (T) are state variables (state functionscalled state functions). The number of particles (N) can also be viewed as a state variable.
• Work (W), Heat (Q) are not state variables.
• $S(V,T)=\frac{3N{k}_B}{2}\ln T+N{k}_B\ln V+constant$, is the entropy of an ideal , monatomic gas. The constant is arbitrary only in classical (non-quantum) thermodynamics. Since it is a function of state variables, entropy is also a state function.

A point on a PV diagram define's the system's pressure (P) and volume (V). Energy (E) and pressure (P) can be deduced from equations of state: Template:Nowrap beginE=E(V,P) and T=T(V,P)Template:Nowrap end. If the piston moves, or if heat is added or taken from the substance, energy (in the form of work and/or heat) is added or subtracted. If the path returns to its original point on the PV-diagram (e.g., 12341 along the rectantular path shown), and if the process is quasistatic, all state variables Template:Nowrap return to their original values, and the final system is indistinguishable from its original state.

The net work done per cycle is area enclosed by the loop. This work equals the net heat flow into the system, $Q_{in}-Q_{out}$ (valid only for closed loops).

Remember: Area "under" is the work associated with a path; Area "inside" is the total work per cycle.

• $\mathrm{\Delta }W=-F\mathrm{\Delta }x=(-P\cdot \mathrm{A}\mathrm{r}\mathrm{e}\mathrm{a})\left(\frac{\mathrm{\Delta }V}{\mathrm{A}\mathrm{r}\mathrm{e}\mathrm{a}}\right)=-P\mathrm{\Delta }V$ is the work done on a system of pressure P by a piston of voulume V. If ΔV>0 the substance is expanding as it exerts an outward force, so that ΔW<0 and the substance is doing work on the universe; ΔW>0 whenever the universe is doing work on the system.
• $\mathrm{\Delta }Q$ is the amount of heat (energy) that flows into a system. It is positive if the system is placed in a heat bath of higher temperature. If this process is reversible, then the heat bath is at an infinitesimally higher temperature and a finite ΔQ takes an infinite amount of time.
• $\mathrm{\Delta }E=\mathrm{\Delta }Q-P\mathrm{\Delta }V$ is the change in energy (First Law of Thermodynamics).

CALCULUS: $\oint PdV=Q_{in}-Q_{out}$ .

In an isothermal expansion (contraction), temperature, T, is constant. Hence P=nRT/V and substitution yields,

$\underset{Vi}{\overset{Vf}{\int }}PdV=\underset{Vi}{\overset{Vf}{\int }}nRT\frac{dV}{V}=nRT\underset{Vi}{\overset{Vf}{\int }}\frac{dV}{V}=nRT\ln \frac{V_f}{V_i}$

<section end=15-Thermodynamics/>

16-Oscillatory Motion and Waves

<section begin=16-Oscillatory_Motion_and_Waves/>

• $x=x_0\cos \frac{2\pi t}{T_0}$ describes oscillatory motion with period $T_0$ (here we use the zero-subscript to denote constants that do not vary with time).
• $x(t)=x_0\cos ({\omega }_{0}t-\phi )$. For example, $\cos ({\omega }_{0}t-\phi )=\sin {\omega }_{0}t$.
• ${\omega }_0=\sqrt{\frac{k_s}{m}}=\frac{2\pi }{T}$ for a mass-spring system with mass, m, and spring constant, k_s.
• ${\omega }_0=\sqrt{\frac{g}{L}}=\frac{2\pi }{T}$ for a low amplitude pendulum of length, L, in a gravitational field, g.
• $PE=\frac{1}{2}{k}_s{x}^2$ is the potential energy of a mass spring system.

Let $x(t)=x_0\cos ({\omega }_{0}t-\phi )=$ describe position:

• $v(t)=dx/dt=-{\omega }_0{x}_0\sin ({\omega }_{0}t-\phi )=v_0\cos ({\omega }_{0}t+...)$, where $v_0={\omega }_0{x}_0$ is maximum velocity.
• $a(t)=dv/dt=-{\omega }_0{v}_0\cos ({\omega }_{0}t-\phi )=a_0\cos ({\omega }_{0}t+...)$, where $a_0={\omega }_0{v}_0={\omega }_0^2{x}_0$, is maximum acceleration.
• $F_0=m{a}_0$, relates maximum force to maximum acceleration.
• $E=\frac{1}{2}m{v}_0^2=\frac{1}{2}{k}_s{x}_0^2$ is the total energy.
• CALCULUS: x(t) obeys the linear homogeneous differential equation (ODE), $\frac{d^{2}x}{d{t}^2}=-{\omega }_0^{2}x(t)$

• $f\lambda =v_p$ relates the frequency, f, wavelength, λ,and the the phase speed, v_p of the wave (also written as v_w) This phase speed is the speed of individual crests, which for sound and light waves also equals the speed at which a wave packet travels.
• $L=\frac{n{\lambda }_n}{2}$ describes the n-th normal mode vibrating wave on a string that is fixed at both ends (i.e. has a node at both ends). The mode number, n = 1, 2, 3,..., as shown in the figure.
• Beat frequency: The frequency of beats heard if two closely space frequencies, $f_1$ and $f_2$, are played is $\mathrm{\Delta }f=|f_2-f_1|$.
• Musical acoustics: Frequency ratios of 2/1, 3/2, 4/3, 5/3, 5/4, 6/5, 8/5 are called the (just) "octave", "fifth", "fourth", "major-sixth", "major-third", "minor-third", and "minor-sixth", respectively.

<section end=16-Oscillatory_Motion_and_Waves/>

17-Physics of Hearing

<section begin=17-Physics_of_Hearing/>

• $v_s=\sqrt{\frac{T}{273}}\cdot 331\text{m/s}$ is the the approximate speed near Earth's surface, where the temperature, T, is measured in Kelvins. A theoretical calculation is $v_s=\sqrt{\frac{\gamma k_{B}T}{m}}$ where $\gamma =\frac{\varpi +2}{\varpi }$ for a semi-classical gas with $\varpi$ degrees of freedom. For a diatomic gas such as Nitrogen, Template:Nowrap beginγ = 1.4.Template:Nowrap end
• $v_s=\sqrt{\frac{F}{\mu }}$ is the speed of a wave in a stretched string if $F$ is the tension and $\mu$ is the linear mass density (kilograms per meter).

<section end=17-Physics_of_Hearing/> Template:Cob

18-Electric charge and field

<section begin=18-Electric_charge_and_field/>

• $F=k_{\mathrm{e}}\frac{qQ}{r^2}=\frac{1}{4\pi {ϵ}_0}\frac{qQ}{r^2}$ is Coulomb's law for the force between two charged particles separated by a distance r: k_e≈8.987×10⁹N·m²·C⁻², and ε₀≈8.854×10⁻¹² F·m⁻¹.
• $\overrightarrow{F}=q\overrightarrow{E}$ is the electric force on a "test charge", q, where $E=k_{\mathrm{e}}\frac{Q}{r^2}$ is the magnitude of the electric field situated a distance r from a charge, Q.

Consider a collection of $N$ particles of charge $Q_i$, located at points ${\overrightarrow{r}}_i$ (called source points), the electric field at $\overrightarrow{r}$ (called the field point) is:

• $\overrightarrow{E}(\overrightarrow{r})=\frac{1}{4\pi {\epsilon }_0}\sum _{i=1}^N\frac{{\widehat{ℛ}}_i{Q}_i}{|{\overrightarrow{ℛ}}_i{|}^2}=\frac{1}{4\pi {\epsilon }_0}\sum _{i=1}^N\frac{{\overrightarrow{ℛ}}_i{Q}_i}{|{\overrightarrow{ℛ}}_i{|}^3}$ is the electric field at the field point, $\overrightarrow{r}$, due to point charges at the source points,${\overrightarrow{r}}_i$ , and ${\overrightarrow{ℛ}}_i=\overrightarrow{r}-{\overrightarrow{r}}_i,$ points from source points to the field point.

CALCULUS supplement:

$\overrightarrow{E}(\overrightarrow{r})=k_e\int \frac{\widehat{ℛ}dQ}{{ℛ}^2}$ is the electric field due to distributed charge, where $dQ\to \lambda d\ell \to \sigma dA\to \rho dV$, and $(\lambda ,\sigma ,\rho )$ denote linear, surface, and volume density (or charge density), respectively.

Template:SpacesCartesian coordinates (x, y, z). Volume element: $dV=dxdydz$. Line element:$d\overrightarrow{\ell }=\hat{x}dx+\hat{y}dy+\hat{z}dz$. Three basic area elements: $\hat{n}dA=$$\hat{z}dxdy$, or,$\hat{x}dydz$, or,$\hat{y}dzdx$.

Template:SpacesCylindrical coordinates (ρ, φ, z): Volume element: $dV=\rho drd\phi dz$ . Line element:$d\overrightarrow{\ell }=\hat{\phi }rd\phi +\hat{r}dr+\hat{z}dz$. Basic area elements: $\hat{n}dA=\rho d\phi dz\hat{\rho }$ (side), and, $\rho d\rho d\phi \hat{z}$ (top end).

Template:SpaceSpherical coordinates (r, θ, φ): Volume element: $dV=r^{2}dr\sin \theta d\theta d\phi \to 4\pi r^{2}dr$ (if symmetry holds). Line element:$d\overrightarrow{\ell }=\hat{r}dr+\hat{\theta }rd\theta +\hat{\phi }r\sin \theta d\phi$. Basic area element of a sphere: $\hat{r}dA=\hat{r}{r}^{2}d\mathrm{\Omega }$, where dΩ is a solid angle. <section end=18-Electric_charge_and_field/>

19-Electric Potential and Electric Field

<section begin=19-Electric_Potential_and_Electric_Field/>

• $U=qV$ is the potential energy of a particle of charge, q, in the presence of an electric potential V.
• $\mathrm{\Delta }V=-E\ell \cos \theta =\overrightarrow{E}\cdot \overrightarrow{\ell }$ (measured in Volts) is the variation in electric potential as one moves through an electric field $E$. The angle between the field and the displacement is θ. The electric potential, V, decreases as one moves parallel to the electric field.
• $\mathrm{\Delta }V=-\sum \overrightarrow{E}\cdot \mathrm{\Delta }\ell$ describes the electric potential if the field is not uniform.
• $V(\overrightarrow{r})=k\sum \frac{Q_j}{{ℛ}_j}$ due to a set of charges $Q_j$ at ${\overrightarrow{r}}_j$ where ${\overrightarrow{ℛ}}_j=\overrightarrow{r}-{\overrightarrow{r}}_j$.

• $Q=CV$ is the (equal and opposite) charge on the two terminals of a capacitor of capicitance, C, that has a voltage drop, V, across the two terminals.
• $C=\epsilon A/d$ is the capacitance of a parallel plate capacitor with surface area, A, and plate separation, d. This formula is valid only in the limit that Template:Nowrap begind²/ATemplate:Nowrap end vanishes. If a dielectric is between the plates, then Template:Nowrap beginε>ε₀≈ 8.85 × 10⁻¹²Template:Nowrap end due to shielding of the applied electric field by dielectric polarization effects.
• $U=\frac{1}{2}QV=\frac{1}{2}C{V}^2=\frac{Q^2}{2C}$ is the energy stored in a capacitor.
• $u=\frac{\epsilon }{2}{E}^2$ is the energy density (energy per unit volume, or Joules per cubic meter) of an electric field.

Template:Cot CALCULUS supplement

closed surfaces | Ω & ∂Ω
To the left are closed surfaces. To the right are open surfaces, Ω, that possess closed boundaries, ∂Ω.

• $\underset{\overrightarrow{p}}{\overset{\overrightarrow{q}}{\int }}\overrightarrow{\mathrm{\nabla }}f\cdot d\overrightarrow{\ell }=f(\overrightarrow{q})-f(\overrightarrow{p})$ is the gradient theorem.

• $\underset{\mathrm{\Sigma }}{\int }\overrightarrow{\mathrm{\nabla }}\times \overrightarrow{F}\cdot \overrightarrow{dA}={\oint }_{\partial \mathrm{\Sigma }}\overrightarrow{F}\cdot d\hat{\ell }$ is Stokes' theorem

• $\underset{\mathrm{\Omega }}{\int }\overrightarrow{\mathrm{\nabla }}\cdot \overrightarrow{F}dV={\oint }_{\partial \mathrm{\Omega }}\overrightarrow{F}\cdot d\overrightarrow{A}$ is the divergence theorem

Here, Ω is a (3-dimensional) volume and ∂Ω is the boundary of the volume, which is a (two-dimensional) surface. Also a surface is Σ, which, if open, has the boundary ∂Σ, which is a (one-dimensional) curve.

• $V(\overrightarrow{b})-V(\overrightarrow{a})=-\underset{\overrightarrow{a}}{\overset{\overrightarrow{b}}{\int }}\overrightarrow{E}\cdot d\ell$ in the limit that the Riemann sum becomes an integral.
• $\overrightarrow{E}=-\overrightarrow{\mathrm{\nabla }}V$ where $\overrightarrow{\mathrm{\nabla }}$ $=\hat{x}\partial /\partial x+\hat{y}\partial /\partial y+\hat{z}\partial /\partial z$ is the del operator.

• ${\epsilon }_0\int \overrightarrow{E}\cdot \overrightarrow{dA}=Q_{encl}$ is Gauss's law for the surface integral of the electric field over any closed surface, and $Q_{encl}$ is the total charge inside that surface.
• $\int \overrightarrow{D}\cdot \overrightarrow{dA}=Q_{free}$ is a useful variant if the medium is dielectric. D=εE is the electric displacement field. The permittivity, Template:Nowrap beginε = (1+χ)ε₀,Template:Nowrap end where Template:Nowrap beginε₀≈ 8.85 × 10⁻¹²Template:Nowrap end, and the electric susceptibility, χ, represents the degree to which the medium can be polarized by an electric field. The free charge, Q_free, represents all charges except those represented by the susceptibility, χ.

Help with Gauss' Laws

Template:Cot {{#lst:Wright_State_University_Lake_Campus/2017-9/Phy2410/Help_with_Gauss'_law}} Template:Cob <section end=19-Electric_Potential_and_Electric_Field/>

20-Electric Current, Resistance, and Ohm's Law

<section begin=20-Electric_Current,_Resistance,_and_Ohm's_Law/>

• $I=\frac{\mathrm{d}Q}{\mathrm{d}t}$ defines the electric current as the rate at which charge flows past a given point on a wire. The direction of the current matches the flow of positive charge (which is opposite the flow of electrons if electrons are the carriers.)
• $V=IR$ is Ohm's Law relating current, I, and resistance, R, to the difference in voltage, V, between the terminals. The resistance, R, is positive in virtually all cases, and if R > 0, the current flows from larger to smaller voltage. Any device or substance that obeys this linear relation between I and V is called ohmic.
• $I=nqA{v}_{drift}$ relates the density (n), the charge(q), and the average drift velocity (v_drift) of the carriers. The area (A) is measured by imagining a cut across the wire oriented such that the drift velocity is perpendicular to the surface of the (imaginary) cut.
• $R=\frac{\rho L}{A}$ expresses the resistance of a sample of ohmic material with a length (L) and area (A). The 'resistivity', ρ ("row"), is an intensive property of matter.
• Power is energy/time, measured in joules/second or J/s. Often called P (never p). It is measured in watts (W)
• Current is charge/time, measured in coulombs/second or C/s. Often called I or i. It is measured in amps or ampheres (A)
• Electric potential (or voltage) is energy/charge, measured in joules/coulomb or J/C. Often called V (sometimes E, emf, $ℰ$). It is measured in volts (V)
• Resistance is voltage/current , measured in volts/amp or V/A. Often called R (sometimes r, Z) It is measured in Ohms (Ω).
• $P=IV=I^{2}R=\frac{V^2}{R}$ is the power dissipated as current flows through a resistor

<section end=20-Electric_Current,_Resistance,_and_Ohm's_Law/>

21-Circuits, Bioelectricity, and DC Instruments

<section begin=21-Circuits,_Bioelectricity,_and_DC_Instruments/>

The current entering any junction is equal to the current leaving that junction. i2 + i3 = i1 + i4	The sum of all the voltages around the loop is equal to zero. v1 + v2 + v3 - v4 = 0	Resistors in parallel
		Resistors in series

voltage divider

• $\sum _{k=1}^n{I}_k=0$ and $\sum _{k=1}^n{V}_k=0$ are Kirchoff's Laws
• $V_{\mathrm{o}\mathrm{u}\mathrm{t}}=\frac{R_2}{R_1+R_2}{V}_{\mathrm{i}\mathrm{n}}$ for the voltage divider shown.

Here the rectangular element is a resistor R. The internal resistance of the voltage source (not shown) is also R.

Charging and discharging a capacitor with the alternating switch shown to the left (i.e. where the RC rise and discharge times are equal).

• Simple RC circuit The figure to the right depicts a capacitor being charged by an ideal voltage source. If, at t=0, the switch is thrown to the other side, the capacitor will discharge, with the voltage, V , undergoing exponential decay:

$V(t)=V_0{e}^{-\frac{t}{RC}},$

where V₀ is the capacitor voltage at time t = 0 (when the switch was closed). The time required for the voltage to fall to $\frac{V_0}{e}\approx .37V_0$ is called the RC time constant and is given by

$\tau =RC.$

<section end=21-Circuits,_Bioelectricity,_and_DC_Instruments/>

22-Magnetism

<section begin=22-Magnetism/>

• $F=qvB\sin \theta$ is the force on a particle with charge q moving at velocity v with in the presence of a magnetic field B. The angle between velocity and magnetic field is θ and the force is perpeduclar to both velocity and magnetic field by the right hand rule.
• $\overrightarrow{F}=q\overrightarrow{v}\times \overrightarrow{B}$ expresses this result as a cross product.
• $\mathrm{\Delta }\overrightarrow{F}=I\mathrm{\Delta }\overrightarrow{\ell }\times \overrightarrow{B}$ is the force a straight wire segment of length $\mathrm{\Delta }\ell$ carrying a current, I.
• $\overrightarrow{F}=I\sum \mathrm{\Delta }\ell \times \overrightarrow{B}$ expresses thus sum over many segments to model a wire.
• CALCULUS: In the limit that $\mathrm{\Delta }\ell \to 0$ we have the integral, $\overrightarrow{F}=I\oint d\ell \times \overrightarrow{B}$.

<section end=VectorMagneticForce/>

• Defining magnetic force and field without calculus:

  

1.   $B=\frac{{\mu }_{0}I}{2\pi r}$ is the magnetic field at a distance r from an infinitely long wire carrying a current, where Template:Nowrap beginμ₀ =Template:Nowrap end Template:Nowrap begin4π × 10⁻⁷ N ATemplate:Nowrap end. This field points azimuthally around the wire in a direction defined by the right hand rule. Application of the force law on a current element, we have
2.   $F=\frac{{\mu }_0{I}_1{I}_2\ell }{2\pi r}$ is the force between two long wires of length $\ell$ separated by a short distance $r<<\ell$. The currents are I₁ and I₂, with the force being attractive if the currents are flowing in the same direction.

Cyclotron motion: For a particle moving perpendicular to B, we have cyclotron motion. Recall that for uniform circular motion, the acceleration is a=v²/r, where r is the radius. Since sin θ =1, Newton's second law of motion (F=ma) yields,

$ma=\frac{m{v}^2}{r}=qvB$

Since, sin θ =0, for motion parallel to a magnetic field, particles in a uniform magnetic field move in spirals at a radius which is determined by the perpendicular component of the velocity:

$r=\frac{m{v}_{\perp }}{qB}$

Hall effect: The Hall effect occurs when the magnetic field, velocity, and electric field are mutually perpendicular. In this case, the electric and magnetic forces are aligned, and can cancel if qE=qvB (since sinθ = 1). Since both terms are porportional to charge, q, the appropriate ratio of electric to magnetic field for null net force depends only on velocity:

$E=vB=\frac{\mathrm{e}\mathrm{m}\mathrm{f}}{\ell }$,

where we have used the fact that voltage (i.e. emf or potential) is related to the electric field and a displacement parallel to that field: ΔV = -E Δs cosθ

CALCULUS supplement:

• $\overrightarrow{B}=\oint \frac{{\mu }_0}{4\pi }\frac{Id\overrightarrow{\ell }\times \hat{r}}{|r{|}^2}$ and the volume integral $\int \frac{{\mu }_0}{4\pi }\frac{\overrightarrow{J}\times \hat{r}}{|r{|}^2}d{\tau }^{\prime }$, where $\overrightarrow{J}$ is current density.
• $\oint 𝐁\cdot \mathrm{d}𝐥={\mu }_0{I}_{encl}$ is Ampere's law relating a closed integral involving magnetic field to the total current enclosed by that path. It is often more convenient to define the magnetic field using $𝐇$ (typically called "H") and defined by ${\mu }_0𝐇=𝐁$ so that H is measured in Amps/meter:
• $\oint 𝐇\cdot \mathrm{d}𝐥=I_{encl}$

<section end=22-Magnetism/>

23-Electromagnetic Induction, AC Circuits, and Electrical Technologies

<section begin=23-Electromagnetic_Induction,_AC_Circuits,_and_Electrical_Technologies/>

In rod's frame the force on carriers is electric, not magnetic. (See railgun)

• $\overrightarrow{E}=\overrightarrow{v}\times \overrightarrow{B}$ is a consequence of the magnetic force law as seen in the reference frame of a moving charged object, where E is the electric field perceived by an observer moving at velocity v in the presence of a magnetic vield, B. Also written as, Template:Nowrap beginE = vBsinθTemplate:Nowrap end, this can be used to derive Faraday's law of induction. (Here, θ is the angle between the velocity and the magnetic field.)
• $\mathrm{\Phi }=\overrightarrow{A}\cdot \overrightarrow{B}=AB\cos \theta$ is the magnetic flux, where θ is the angle between the magnetic field and the normal to a surface of area, A.
• $emf=-N\frac{\mathrm{\Delta }\mathrm{\Phi }}{\mathrm{\Delta }t}$ is Faraday's law where t is time and N is the number of turns. The minus sign reminds us that the emf, or electromotive force, acts as a "voltage" that opposes the change in the magnetic field or flux.

<section end=23-Electromagnetic_Induction,_AC_Circuits,_and_Electrical_Technologies/>

24-Electromagnetic Waves

<section begin=24-Electromagnetic_Waves/>

• ${ϵ}_0\partial \overrightarrow{E}/\partial t$ is called the displacement current because it replaces the current density when using Ampère's circuital law to calculate the line integral of the magnetic field around a closed loop.

Maxwell's equations hold for all volumes and closed surfaces. In vacuum, electromagnetic waves travel at the speed, $c=\frac{1}{\sqrt{{ϵ}_0{\mu }_0}}$.

${\oint }_S𝐄\cdot \mathrm{d}𝐀=\frac{1}{{ϵ}_0}\underset{V}{\int }\rho \mathrm{d}V$	${\oint }_C𝐄\cdot \mathrm{d}𝐥=-\underset{S}{\int }\frac{\partial 𝐁}{\partial t}\cdot \mathrm{d}𝐀$
${\oint }_S𝐁\cdot \mathrm{d}𝐀=0$	${\oint }_C𝐁\cdot \mathrm{d}𝐥={\mu }_0\underset{S}{\int }𝐉\cdot \mathrm{d}𝐀+{ϵ}_0{\mu }_0\underset{S}{\int }\frac{\partial 𝐄}{\partial t}\cdot \mathrm{d}𝐀$
$\underset{V}{\int }\rho \mathrm{d}V=Q_{\text{encl}}$	$\underset{S}{\int }𝐉\cdot \mathrm{d}𝐀={\mathrm{I}}_{\text{encl}}$

The last row relates the volume integral of the charge density to the enclosed charge, and also the surface integral of the current density to the current that pierces the surface (or is enclosed by the closed loop that defines the surface). <section end=24-Electromagnetic_Waves/>

25-Geometric Optics

<section begin=25-Geometric_Optics/>

$\frac{1}{S_1}+\frac{1}{S_2}=\frac{1}{f}$

relates the focal length f of the lens, the image distance S₁, and the object distance S₂. The figure depicts the situation for which Template:Nowrap are all positive: (1)The lens is converging (convex); (2) The real image is to the right of the lens; and (3) the object is to the left of the lens. If the lens is diverging (concave), then f < 0. If the image is to the left of the lens (virtual image), then S₂ < 0 .

<section end=25-Geometric_Optics/>

Template:Hidden begin ===26-Vision and Optical Instruments===<section begin=26-Vision_and_Optical_Instruments/>*foo<section end=26-Vision_and_Optical_Instruments/>Template:Hidden end

27-Wave Optics

<section begin=27-Wave_Optics/>

• $S\sin \theta =n\lambda$ where $n=1,2,3,4...$ describes the constructive interference associated with two slits in the Fraunhoffer (far field) approximation.

• $\cos \left({\omega }_{1}t\right)+\cos \left({\omega }_{2}t\right)=A(t)\cos \left(\overline{\omega }t\right)$ where $\overline{\omega }$ is the high frequency carrier and $A(t)=2\cos \left(\frac{\mathrm{\Delta }\omega }{2}t\right)$ is the slowly varying envelope. Here,

$\overline{\omega }=\frac{{\omega }_1+{\omega }_2}{2}$ and $\mathrm{\Delta }\omega ={\omega }_2-{\omega }_1$. Consequently, the beat frequency heard when two tones of frequency $f_1$ and $f_2$ is $\mathrm{\Delta }f=f_2-f_1$.

• $cos(k{\ell }_1-\omega t)+cos(k{\ell }_2-\omega t)=2cos\left(k\mathrm{\Delta }\ell \right)\cos (\omega t-\varphi )$ models the addition of two waves of equal amplitude but different path length, $\mathrm{\Delta }\ell ={\ell }_2-{\ell }_1$.

<section end=27-Wave_Optics/> Template:Cob

Test 4 Condensed Summary

• ${\oint }_S𝐄\cdot \mathrm{d}𝐀=\frac{1}{{ϵ}_0}{Q}_{\text{encl}}$ (to find the electric field of a capacitor.) Also, ${\oint }_S𝐁\cdot \mathrm{d}𝐀=0$
• $\mathrm{\Delta }V=-\underset{a}{\overset{b}{\int }}𝐄\cdot \mathrm{d}𝐥$ (is used to relate electric field to voltage (or emf).)
• ${\oint }_C𝐁\cdot \mathrm{d}𝐥={\mu }_0{\mathrm{I}}_{\text{encl}}+{ϵ}_0{\mu }_0\underset{S}{\int }\frac{\partial 𝐄}{\partial t}\cdot \mathrm{d}𝐀$ (is Amphere's Law with Maxwell's extra term. Note that ${ϵ}_0{\mu }_0=1/c^2$. Also, if Maxwell's term is absent, it is more convenient to define H as B=μ₀ so that ${\oint }_C𝐇\cdot \mathrm{d}𝐥={\mathrm{I}}_{\text{encl}}$

• Basic Capacitor rules: $Q=CV$ where for a parallal plate capacitor, $C={ϵ}_{0}A/d$. A capacitor discharging through a resistor obeys $V(t)=V_0{e}^{\frac{-t}{RC}}$ (RC is the "RC decay time").

• To find the electric field sum over the point sources:

$\overrightarrow{E}(\overrightarrow{r})=\frac{1}{4\pi {\epsilon }_0}\sum _{i=1}^N\frac{{\widehat{ℛ}}_i{Q}_i}{|{\overrightarrow{ℛ}}_i{|}^2}=\frac{1}{4\pi {\epsilon }_0}\sum _{i=1}^N\frac{{\overrightarrow{ℛ}}_i{Q}_i}{|{\overrightarrow{ℛ}}_i{|}^3}$ where ${\overrightarrow{ℛ}}_i=\overrightarrow{r}-{\overrightarrow{r}}_i,$ points from source points ${\overrightarrow{r}}_i$ to the field point $\overrightarrow{r}$.